Aluminum Tread Bright

In many industries, there is a certain requirement for the surface brightness of aluminum tread plates. For example, in various decorative industries, high surface brightness of aluminum tread bright can provide better decorative effects. The aluminum tread brite plate is produced using mechanical polishing. The specific steps are as follows: first, prepare the materials; then place the aluminum tread plate on the workbench and fix it, determine the reciprocating motion of the platform according to the size of the aluminum tread plate; then perform empty machine trial operation to observe whether the rotating parts of the equipment operate smoothly without vibration; then perform dry polishing, followed by precision polishing, and finally use a polishing agent with 99% alumina, with a fineness of 350 meshes, to improve the surface smoothness of the bright aluminum tread plate.

Product specification of aluminum tread bright diamond plate:

Typical Alloy: 3003

Material State: H14, H24, H34, H111, O

Thickness (mm): <12.0MM

Width (mm): <2200MM

Length (mm): <12000MM

Typical Products: floors, interior walls, stairs, kitchens, bathrooms, garages, refrigerators, other decorations, interior/exterior panels of vehicles, tools and equipment, as well as conventional industrial and manufacturing materials. Mainly used for high plasticity and good weldability requirements.

The advantages of aluminum tread bright product:

1. Low density: the density of pure aluminum is close to 2700kg/m3, which is about 35% of the density of iron.

2. Corrosion resistance: the surface of aluminum and its alloys easily forms a dense and firm Al2O3 protective film.

3. No low-temperature brittleness: aluminum does not lose strength and plasticity as the temperature decreases below zero Celsius.

4. High reflectivity: the reflectivity of aluminum polished surface to white light can reach over 80%; the higher the purity, the higher the reflectivity.

5. Non-magnetic, does not produce sparks upon impact.