Haomei 8011 aluminum foil roll for coffee capsule is 0.0055 to 0.009mm thick, and 200mm to 1500mm wide. Please note that we supply only raw material, no finished products of laminate aluminium foil. You need to further process it before using it directly as a capsule material. The surface of 8011 coffee capsule aluminium foil we produce is mill finish. The inner diameter is 76mm (3”) or 152mm(6”), and the weight per roll 150kg to 200kg. Haomei 8011 foil has good sealing effect, light shielding property, low pin hole rate, and excellent laminating property, applied to the flexible packing of food and pharmaceutics.
A 8011 aluminum foil roll for coffee capsule is mainly combined with paper, which is on the outside or under the transparent layer, and the metallic luster of the aluminum foil is the mark of this packaging. The light shielding and moisture resistance of aluminum foil should be lifted several orders of magnitude for such packaging. Since the moisture and light shielding of the aluminum foil are not the most important indicators, the thickness of the foil is very small, which leads to high pinhole rate. But this does not influence the application factors of 8011 aluminium foil in coffee capsule. The needle holes of 0.006mm thick foil can reach 2000/m2, with a total area of 20m2, accounting for two-thirds of the total area. Even if 20000 /m2 are reached, the area of pinholes accounts for only two ten thousands. Therefore, as far as the aluminum foil composite layer is concerned, the permeability and permeability of the composite layer are 10000 times lower than that of the packaging without aluminum foil. It is enough for packaging that is not demanding very high.
Haomei 8011 aluminum foil rolls for coffee capsule are featured by uniform gloss, no vibration mark, 3% thickness tolerance, good expansibility (less than 3m), less pinholes and suitable mechanical properties. Welcome to contact us for a price!