1050 H Alloy aluminum coil 0.3mm-6.0mm performance

Only in the daily life, the maintenance of the 1050 H alloy aluminum coil can ensure the efficient and safe use of the alloy aluminum coil. The 0.3mm thickness aluminum coil is the main product of our company and is widely used in construction. Since the alloy aluminum coil is easy to be oxidized, it is necessary to strengthen the alloy. The following article will introduce the maintenance of 1050 aluminum coils for transformer in detail.

In the process of transportation, alloy aluminum coils must be covered with crepe cloth to prevent the intrusion of rain and snow. It is necessary to ensure the oxide film and paint on the surface of the profile. The membrane is not damaged, and qualified cement and sand are used at the same time. The storage environment should be dry, bright, well ventilated and non-corrosive. During storage, the bottom of the tank must be separated from the ground by damp wood to keep the distance from the ground more than 10CM. It is strictly forbidden to store together with chemical materials and moist materials. After processing aluminum alloy rolls into doors and windows, clean them regularly with a clean cloth and neutral.

1050 Alloy aluminum coil performance:

1, it is strictly forbidden to store together with chemical materials and moist materials. After processing into doors and windows, 1050 thickness alloy aluminum coils are regularly cleaned with a clean cloth and neutral.

2, the storage environment should be dry, bright, well ventilated and non-corrosive climate. When storing, the bottom of the wall must be separated from the ground by damp wood to keep the distance from the ground more than 10CM.

3, anti-rust alloy aluminum coil in the transportation process, must be covered with a cloth to prevent the intrusion of rain and snow. It must be ensured that the oxide film and paint film on the surface of the profile are not damaged, and qualified cement and sand are used.